About Us

For over 20 years Tilemaster has been at the forefront with the development, manufacture and marketing of  quality specialist tiling products, flooring products and construction materials for the flooring and tiling  industries. Tilemaster consistently meets the needs of the market, especially the needs of contractors, specifiers and distributors for quality reliable, products which makes Tilemaster a world-wide leader for sub-floor smoothing compounds, industrial flooring systems, floorcovering adhesives, floor screeds,  tile adhesives and grouts.

TA ltd is a unique manufacturer, "we have the quality and flexibility to manufacture a product that matches the customers exact specialised requirements".

Adhesives

Extra Bond Adhesive
Setaflex
Standard set
Standard Setaflex
Rapid Set
Ultimate Adhesive

Self levelling compounds

Self Leveller
Levelflex

Grouts

Wide Joint Floor Grout
Flexigrout
Wall Grout
Wide Joint Wall Grout

Primers and Admixes

Flexmaster
Wide Joint Floor Grout PDF Print E-mail

RAPID SET WIDE JOINT FLOOR GROUT

wide-joint.png SPECIFICATION CATEGORY:

Conforms to water resistance requirements of BS 5980 Type 1 Class AA.

DESCRIPTION:

A rapid setting water resistant cement based powder grout suitable for grouting floor tiles on a solid substrate to a joint width between 3mm and 15mm.  Adding Flexmaster additive will increase durability, bond strength and flexibility.

ADVANTAGES:

  • Fast setting formula
  • Light foot traffic after 3 hours
  • Highly durable
  • Interior and exterior use.
  • Available in Grey, White, Ivory, Brown, Charcoal, Beige, Limestone, Sandstone and Light Sandstone.

USES:

For use on glazed and unglazed tiles in both wet and dry conditions, internally and externally.  When mixed with Flexmaster additive will increase durability, water resistance, bond strength and flexibility, when grouting areas subject to movement, such as timber floors, vibration and temperature changes such as underfloor heating.  Please refer to our “Tile to Substrate “guide or call our 24 hr helpline on 01257 269243.

APPLICATION:

Only mix small quantities at a time until you have become accustomed to the fast setting nature of the product  .Always mix powder to water and mix to a buttery consistency, never add water after initial mixing, as this will impair the strength of the grout.  As an approximate guide for powder to water ratio, 20K of powder requires approximately 5L of water.  Using a rubber squeegee or trowel, thoroughly work grout into the joints in as large an area as possible to the facing edge of the tile before hardening commences.  For a neater finish, smooth joints with a suitable round headed tool of suitable size and shape.  Remove excess grout from the face of tiles within approximately 30 minutes of application with a damp cloth.  If Flexmaster additive has been mixed with the grout you must be more aware of cleaning excess grout from the surface of the tile as the water resistance will make it very difficult to clean the tiles once hardening has started.  Setting time and strength development of grout will vary with temperature; it will be slowed by lower temperature and accelerated by higher temperature.  Do not use below 5’C.

COVERAGE: 10k pack will grout up to 6.5sq metres of 150mm by 150mm by 8mm tile with a 8mm grout joint.

STORAGE: Store in a cool dry area.  Shelf life should be approximately 6 months.

LIMITATIONS: Do not use in areas subject to continuous water immersion, or swimming pools.

PACK SIZES: Available in 20, 10 and 5 kilos sacks.

HELPLINE: 24 HRS 01257 269243                        TILEMASTER : Strength Inxess

 
[ Back ]